Sprachauswahl

Deutsch
English

Mitgliederlogin

Benutzeranmeldung

Geben Sie Ihren Benutzernamen und Ihr Passwort ein, um sich an der Website anzumelden:
Anmelden

Aktuelles

Abschlusskolloquium international: VHCF VII

03.-05.07.2017,  Dresden

Deadline for abstract submission: 30.06.2016

Sponsoren

Publikationen 2016

  • Adam, TJ., Horst, P.: Fatigue Damage and Fatigue Limits of a GFRP Angle-Ply Laminate tested under Very High Cycle Fatigue Loading, Eingereicht bei Journal of Fatigue, (2016)
  • J. Bach, J. J. Möller, M. Göken, E. Bitzek, H. W. Höppel: On the transition from plastic deformation to crack initiation in the high- and very high-cycle fatigue regimes in plain carbon steels, International Journal of Fatigue, Article in Press, http://dx.doi.org/10.1016/j.ijfatigue.2016.04.003
  • D. Backe, F. Balle, D. Eifler: Three point bending fatigue of carbon fiber fabric reinforced polyphenylensulfide in the very high cycle fatigue regime, Key Engineering Materials: Vol. 664 (2016), 47-54 dx.doi.org/10.4028/www.scientific.net/KEM.664.47
  • D. Backe, F. Balle: Ultrasonic fatigue and microstructural characterization of carbon fiber fabric reinforced polyphenylene sulfide in the very high cycle fatigue regime, Composite Science and Technology 126 (2016) 115 - 121 dx.doi.org/10.1016/j.compscitech.2016.02.020
  • T. Beck, S. A. Kovacs, F. Ritz: VHCF Behavior and Work Hardening of a Ferritic-Martensitic Steel at High Mean Stresses, Key Engineering Materials, Volume 664, 2016, Pages 246-254, 10.4028/www.scientific.net/KEM.664.246
  • A. C. Grigorescu, P.-M. Hilgendorff, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Cyclic deformation behavior of austenitic Cr–Ni-steels in the VHCF regime: Part I – Experimental study, 2016, International Journal of Fatigue, eingereicht und zur Veröffentlichung angenommen, doi:10.1016/j.ijfatigue.2016.05.005
  • Andrei Grigorescu, Anton Kolyshkin, Martina Zimmermann, Hans-Jürgen Christ: Effect of martensite content and geometry of inclusions on the VHCF properties of predeformed metastable austenitic stainless steels, Procedia Structural Integrity, 2, 2016, p.  1093–1100, doi:10.1016/j.prostr.2016.06.140
  • P.-M. Hilgendorff, A. C. Grigorescu, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Cyclic deformation behavior of austenitic Cr-Ni-steels in the VHCF regime: Part II - microstructure-sensitive simulation, 2016, International Journal of Fatigue, eingereicht und zur Veröffentlichung angenommen, dx.doi.org/10.1016/j.ijfatigue.2016.05.006
  • Just, G.; Koch, I.; Gude, M.: Semi-analytic modelling strategy for the initiation and evolution of transverse cracking of CFRP with and without nano-modified matrix, Darmstadt, Deutschland, zur Veröffentlichung angenommen, 2016
  • Koch, I.; Just, G.; Koschichow, R.; Hanke, U.; Gude, M.: Guided bending experiment for the characterisation of CFRP in VHCF-loading, Polymer Testing 54 (2016), S. 12-18
  • A. Kolyshkin, M. Zimmermann, E. Kaufmann, H.-J. Christ: Experimental investigation and analytical description of the damage evolution in a Ni-based superalloy beyond 106 loading cycles, 2016, Angenommen bei International Journal of Fatigue. www.sciencedirect.com/science/article/pii/S0142112316300238
  • A. Kolyshkin, A. Grigorescu,E. Kaufmann,M. Zimmermann, H.-J. Christ: Development of a probabilistic model for the prediction of fatigue life in the very high cycle fatigue (VHCF) range based on inclusion population, 2016, Angenommen bei "Procedia Structural Integrity"
  • K.-H. Lang, , M. Korn, T. Rohm: Very High Cycle Fatigue Resistance of the Low Alloyed Steel 42CrMo4 in Medium- and High-Strength Quenched and Tempered Condition, Procedia Structural Integrity, Volume 2, 2016, Pages 1133-1142
  • Leopold C, Kosmann J, Liebig W, Fiedler B: Influence of graphene nanoparticle modification on crack initiation in epoxy matrix and the different layers of CFRP cross-ply laminates under static and cyclic loading, Material Science and Engineering (MSE), Darmstadt, Deutschland, 2016
  • P. Lorsch, M. Sinapius, P. Wierach: A resonant testing method for high frequency testing of composites in the VHCF regime, 2016, Konferenz MSE, Darmstadt
  • H. Madhusoodanan, E. L. Jansen, R. Rolfes: 3D simulation of damage behavior of GFRPs in the very high cycle regime, Proceedings of  Material Science and Engineering Conference 2016, 27-29 September  2016, Darmstadt, Germany
  • J. J. Möller, E. Bitzek: BDA: A novel method for identifying defects in body-centered cubic crystals, MethodsX 3 (2016) 279–288
  • J. J. Mo?ller, A. Prakash, E. Bitzek: FE2AT – finite element informed atomistic simulations, Chap. 9 of Multiscale Materials Modeling - Approaches to Full Multiscaling, Ed. by S. Schmauder, I. Schäfer, De Gruyter (2016), in press
  • F. Ritz. T. Beck: Fatigue behavior of martensitic steels for low-pressure steam turbine blades in the very high cycle fatigue (VHCF) regime, Vortrag & Proceedings, Young Reserarcher Symposium, TU Kaiserslautern, 2016
  • Sander, M.; Müller, T.; Stäcker, C.: Very high cycle fatigue behavior under constant and variable amplitude loading, Structural Integrity Procedia, 2016, dx.doi.org/10.1016/j.prostr.2016.06.005
  • D. Spriestersbach, A. Brodyanski, J. Lösch, M. Kopnarski, E. Kerscher: Very high cycle fatigue of bearing steels with arti?cial defects in vacuum, 2016, Materials Science and Technology, S. 1-8
  • D. Spriestersbach, A. Brodyanski, J. Lösch, M. Kopnarski, E. Kerscher: Very high cycle fatigue of high-strength steels: Crack initiation by FGA formation investigated at artificial defects, 2016, Structural Integrity Procedia, (accepted)
  • Sridaran Venkat R., Starke P., Boller C., Backe D., Balle F., Müller B., Heckel T., Gohlke D., Bruno G.: Application of a Nonlinearities Based Inverse Approach for the Evaluation of Damage Mechanisms in Very High Cycle Fatigued CFRP Structures, Proc. of MSE, Darmstadt/Germany (2016) (in progress)
  • V. Trappe, A. Müller, S. Hickmann: Infinite Life of CFRP Evaluated Non-Destructively with X-Ray-Refraction Topography In-Situ Mechanical Loading, 2016, Vortrag + Paper, WCNDT, 9 Seiten
  • V. Trappe, A. Müller, S. Hickmann: Nondestructive investigation of the VHCF-endurance on cyclically loaded CFRP by X-Ray-Refractography, 2016, Vortrag + Paper, ECCM17, 11 Seiten
  • Viganò, N., Tanguy, A., Hallais, S., Dimanov, A., Bornert, M., Batenburg, K. J., & Ludwig, W.: Three-dimensional full-field X-ray orientation microscopy, 2016, Scientific Reports, 6, 20618. http://dx.doi.org/10.1038/srep20618
  • Viganó N., Nervo L., Valzania L., Singh G., Preuss M., Batenburg K.J., Ludwig W.: A feasibility study of full-field X-ray orientation microscopy at the onset of deformation twinning, Journal of Applied Crystallography, 2016, 49, 544-555 dx.doi.org/10.1107/S1600576716002302
  • Viganó N, Batenburg K.J., Ludwig W.: An orientation-space super sampling technique for six-dimensional diffraction contrast tomography, vol. 146, no. 2, pp. 219-230, 2016, Fundamenta Informaticae, accepted, DOI:10.3233/FI-2016-1383

Publikationen 2015

  • Adam, T.J., Horst, P.: Cracking and delamination of cross- and angle ply GFRP bending specimens under very high cycle fatigue loading, ICCM20 - 20th International Conference on Composite Materials, Copenhagen, 2015
  • Alexandra Müller, Anja Weidner, Horst Biermann: Influence of reinforcement geometry on the very high-cycle fatigue behavior of aluminum-matrix-composites, Materials Science Forum Vols 825-826 (2015) pp 150-157, doi:10.4028/www.scientific.net/MSF.825-826.150
  • D. Backe, F. Balle, D. Eifler: Fatigue testing of CFRP in the Very High Cycle Fatigue (VHCF) regime at ultrasonic frequencies, Composites Science and Technology, 106 (2015), 93-99, dx.doi.org/10.1016/j.compscitech. 2014.10.020
  • D. Backe, F. Balle, D. Eifler: Microstructural Characterization of fatigue damage of CFRP in the very high cycle fatigue regime, Proceedings: Advanced Composites for Aerospace, Marine, and Land Application II, edited by: T. Sano and T. S. Srivatsan, TMS (2015), 325-334
  • D. Backe, F. Balle, D. Eifler: Ultrasonic fatigue of carbon fiber fabric reinforced polyphenylene sulfide in the very high cycle fatigue regime: Test procedure and microstructural analysis, Proceedings 20th International Conference on Composite Materials (ICCM20), Paper 150701-2231, 19-24th July 2015, Copenhagen (Denmark)
  • D. Backe,F. Balle: Accelerated fatigue testing of thermoplastic composite materials at ultrasonic frequencies, Proceedings of the 14th Japanese-European Symposium on Composite Materials, Kanazawa Institute of Technology (KIT), Kanazawa (Japan), 2015
  • Bagchi S., Sridaran Venkat R., Boller C., Starke P., Mitra M.: Monitoring Early Damage Initiation of Very High Cycle Fatigued Composite Material Using a Nonlinearities Based Inverse Approach, Proc. of the 10th Internat. Workshop on Struct. Health Monit. (IWSHM), Stanford/CA, USA (2015), 8 Seiten
  • Boller C., Bagchi S., Sridaran Venkat R., Starke P., Mitra M.: Simulation Based Smart Sensing Design for Fatigue Damage Detection in CFRP Using Non-linear Phenomena, CANSMART 2015: International Conference on Smart Materials and Structures & SMN 2015: 5th International Conference on Smart Materials and Nanotechnology in Engineering, Vancouver/Canada (2015), 8 Seiten
  • B. Dönges, K. Istomin, M. Söker, N. Schell, U. Krupp, U. Pietsch, C.-P. Fritzen, H.-J. Christ: Experimental investigation and numerical description of the damage evolution in a duplex stainless steel subjected to VHCF-loading, Materials Science & Engineering A, 646 (2015), 8-18
  • P.-M. Hilgendorff, A. Grigorescu, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Simulation of the interaction of plastic deformation in shear bands with deformation-induced martensitic phase transformation in the VHCF regime, 2015, Key Engineering Materials, 664, 314-325, dx.doi.org/10.4028/www.scientific.net/KEM.664.314
  • U. Krupp, A. Giertler, M. Söker, H. Fu, B. Dönges, H.-J. Christ, A. Hüsecken, U. Pietsch, C.-P. Fritzen, W. Ludwig: The behavior of short fatigue cracks during Very High Cycle (VHCF) Fatigue of duplex stainless steel, Engineering Fracture Mechanics, 145 (2015), 197-209
  • Koch I, Just G, Gude M, Fiedler B: Inter fibre cracking behaviour of CFRP under very high cycle fatigue loading, International Conference on Fatigue of Composites (ICFC). Paris, Frankreich; 2015
  • A. Kolyshkin, M. Zimmermann, H.-J. Christ: Untersuchung der Rissinitiierung und -ausbreitung im Bereich sehr hoher Lastspielzahlen (VHCF) mittels Wechselstrompotentialsonde, 2015, In: M. Borsutzki und G. Moninger: Werkstoffprüfung 2015: Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Verlag Stahleisen, Düsseldorf, S. 49-54
  • J. J. Möller, E. Bitzek: On the influence of crack front curvature on the fracture behavior of nanoscale cracks, Engineering Fracture Mechanics, 150 (2015) 197-208
  • Müller, T.; Sander, M.: Investigation of variable amplitude loading and stress ratio in the very high cycle fatigue regime using micro-notched specimens, Proceedia Engineering, Vol. 101, 2015, pp. 322-329, Doi: 10.1016/j.proeng.2015.02.039
  • N. Pashniak, A. Abboud, S. Send, B. Dönges, A.K. Hüsecken, H.-J. Christ, U. Pietsch: Application of energy dispersive pnCCD detector in material science using hard x-rays, TMS 2015 Supplemental Proceedings (2015)
  • H.-P. Ortwein: Eine transparente Deckschicht als visueller Indikator für die Rissentwicklung in CFK, 2015, Dissertation, BAM-Dissertationsreihe, 119 Seiten

Publikationen 2014

  • Adam, T.J., Horst, P.: Experimental investigation of the very high cycle fatigue of GFRP [90/0]s cross-ply specimens subjected to high-frequency four-point bending, 2014, Comp. Sci & Techn., Vol. 101, pp. 62-70
  • Adam, T.J. & Horst, P.: Investigation of the very high cycle fatigue behavior of GFRP cross-ply bending specimens, ECCM16 - 16TH European Conference on Composite Materials, Seville, 2014
  • D. Backe, F. Balle, D. Eifler: Very high cycle fatigue of carbon fiber reinforced polyphenylensulfide by high power ultrasonics, Proceedings, 6th International Conference on Very High Cycle Fatigue, 15th-18th October, 2014, Chengdu, China
  • F. Balle, D. Backe, D. Eifler: Prüfvorrichtung und Verfahren zur Beurteilung des Ermüdungsverhaltens eines Prüflings, Patentschrift DE 10 2012 110 811 B4 2014.12.04 (Patent erteilt)
  • T. Beck, S. Kovacs: VHCF behavior of a ferritic-martensitic steel at high mean stresses, Vortrag & Proceedings, VHCF 6, Chengdu, 15.-18.10.2014
  • Bomas, H; Burkart, K; Zoch, H.-W.: VHCF behaviour of case-hardened specimens made of two grades of steel SAE 5120 differing in microstructure, 2014, Int J Fatigue 60, 63-73, doi:10.1016/j.i.fatigue.2012.10.001
  • Burkart, K; Bomas, H; Clausen, B.; Zoch, H.-W.: Evaluation of multiple-flaw failure of bearing steel 52100 in the VHCF regime, 2014, Proceedings of the 6th International Conference on Very High Cycle Fatigue, Chengdu, PSM11
  • P. Grad, D. Spriestersbach, E. Kerscher: Influence of the inclusion type on the threshold value of failure in the VHCF-regime of high-strength steels, 2014, Advanced Materials Research, 891-892, S.339-344
  • T. Dally, A. Grigorescu, C. Müller-Bollenhagen, M. Zimmermann, H.-J. Christ, K. Weinberg: Using martensite formation during tube-forming to optimize fatigue strength, Steel Research International, 85( 9), 2014, p.  1355-1363, DOI: 10.1002/srin.201300281
  • A. Giertler, M. Söker, B. Dönges, K. Istomin, W. Ludwig, U. Pietsch, C.-P. Fritzen, H.-J. Christ, U. Krupp: The significance of local plasticity for the crack initiation process during very high cycle fatigue of high strength, Procedia Materials Science, 3 (2014), 1353-1358
  • A. Grigorescu, P. M. Hilgendorff, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Comparative study on the fatigue evolution of a stable and a metastable austenitic stainless steel in the VHCF regime, Proc. der 6th Intern. Conference on Very High Cycle Fatigue, 15.-18. Oktober 2014, Chengdu, China, als Manuskript PSM10
  • A. Grigorescu, P.-M. Hilgendorff, M. Zimmermann, C-P. Fritzen, H.-J. Christ: Effect of geometry and distribution of inclusions on the VHCF properties of a metastable austenitic stainless steel, Advanced Materials Research, 891-892, 2014, p. 440-445, DOI:10.4028/www.scientific.net/AMR.891-892.440
  • A. Grigorescu, P. M. Hilgendorff, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Einfluss der Phasenumwandlungen auf die monotone Festigkeit des metastabilen Austenitstahls X2CrNi18-10, Tagungsband zur Werkstoffprüfung 2014, Berlin, 2014, p. 175-180
  • P.-M. Hilgendorff, A. Grigorescu, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Numerical investigation of the influence of shear band localization on the resonant behavior in the VHCF regime, 2014, Theoretical and Applied Mechanics Letters, 4 (051004), dx.doi.org/doi:10.1063/2.1405104
  • P.-M. Hilgendorff, A. Grigorescu, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Simulation of deformation-induced martensite formation and its influence on the resonant behavior in the very high cycle fatigue (VHCF) regime, 2014, Procedia Materials Science, 3 (0), 1135-1142, dx.doi.org/10.1016/j.mspro.2014.06.185
  • A.K. Hüsecken, M. Söker, K. Istomin, B. Dönges, H.-J. Christ, U. Krupp, U. Pietsch: Influence of the number of fatigue cycles on the peak shape of X-ray rocking curves at duplex steel samples treated by VHCF, Procedia Engineering, 74, 2014, 53-56
  • K. Istomin, B. Dönges, N. Schell, H.-J. Christ, U. Pietsch: Analysis of VHCF damage in a duplex stainless steel using hard X-ray diffraction techniques, International Journal of Fatigue, 66 (2014), 177-182
  • Knoll J, Just G, Koch I, Koschichow R, Fiedler B: To the fatigue mechanisms of nanoparticle modified carbon fibre reinforced epoxy and its characterization, Material Science and Engineering (MSE). Darmstadt, Deutschland; 2014
  • Knoll JB, Koch I, Schulte K, Gude M, Fiedler B: Damage mechanisms of nanoparticle-modified CFRP under very high cycle fatigue-loading, European Conference on Composite Materials, ECCM, 2014
  • Knoll JB, Riecken BT, Kosmann N, Chandrasekaran S, Schulte K, Fiedler B: The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxy, Composites Part A: Applied Science and Manufacturing 2014; 67(0): 233–40
  • A. Kolyshkin, A. Grigorescu, E. Kaufmann, M. Zimmermann, H.-J. Christ: Development of a probabilistic model for the prediction of fatigue life in the very high cycle fatigue (VHCF) range based on inclusion population, 2014, MATEC Web of Conferences 12, 10001. DOI:10.1051/matecconf/201412100007
  • A. Kolyshkin, E. Kaufmann, M. Zimmermann, H.-J. Christ: Development of a fatigue life prediction concept in the very high cycle fatigue range based on microstructural features, 2014, 6th International Conference on Very High Cycle Fatigue (VHCF-6), Chengdu, China
  • A. Kolyshkin, M. Cremer, E. Kaufmann, M. Zimmermann, H.-J. Christ: Vorhersage der Größe der bruchrelevanten Defekte und der entsprechenden Lebensdauer von Ermüdungsproben im VHCF-Bereich auf Basis metallographischer Untersuchungen, 2014, In: W. Grellmann und H. Frenz: Werkstoffprüfung 2014: Fortschritte in der Werkstoff-prüfung für Forschung und Praxis, DVM e.V., Berlin, S. 73-78
  • U. Krupp, A. Giertler, M. Söker, H. Fu, B. Dönges, H.-J. Christ, K. Istomin, A. Hüsecken, U. Pietsch, C.-P. Fritzen, W. Ludwig: Significance and Mechanism of the Crack Initiation Process during Very High Cycle Fatigue of Duplex Stainless Steel, Procedia Engineering, 74 ,2014, 143-146
  • Paul Lorsch, Till Julian Adam, Marcel Zeisberg, Michael Sinapius, Peter Horst, Raimund Rolfes, Peter Wierach, Heiko Krüger: Investigating the VHCF of composite materials using new testing methods and a new fatigue damage model, Proceedings of the 6th International Conference on VHCF,  15-18 October 2014, Chengdu, China
  • P. Lorsch, M. Sinapius, P. Wierach: Resonant approach for testing glass-fiber-reinforced composites in the VHCF-regime, 2014, Konferenz MSE, Darmstadt
  • J. J. Möller, E. Bitzek: Fracture toughness and bond trapping of grain boundary cracks, Acta Materialia 73 (2014) 1–11
  • J. J. Möller, E. Bitzek: Comparative study of embedded atom potentials for atomistic simulations of fracture in ?-iron, Model. Simul. Mater. Sci. Eng. 22 (2014) 045002
  • A. Müller, V. Trappe: Investigation of micro defects under cyclic loading with X-Ray-Refractography, 2014, Vortrag, MSE
  • Müller, T.; Sander, M.: Experimentelle Untersuchung und Schadensrechnung zweistufiger Blocklastversuche im VHCF Bereich, DVM-Bericht 246, Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse, Prüfmethoden und Anwendungen, Deutscher Verband für Materialforschung und –prüfung e.V., Berlin, 2014
  • F. Ritz, S. Kovacs, T. Beck: VHCF Behaviour of a Ferritic-Martensitic Steel at High Mean Stresses, Vortrag, MSE, Darmstadt, 2014
  • Sander, M.;  Müller, T.; Lebahn, J.: Influence of mean stress and variable amplitude loading on the fatigue behaviour of a high-strength steel in VHCF regime, International Journal of Fatigue, Vol. 62, 2014, pp. 10-20. dx.doi.org/10.1016/j.ijfatigue.2013.04.015
  • D. Spriestersbach, P. Grad, E. Kerscher: Crack Initiation Mechanisms and Threshold Values of Very High Cycle Fatigue Failure of High Strength Steels, 2014, Procedia Engineering,  74, S. 84–91
  • D. Spriestersbach, P. Grad, E. Kerscher: Influence of different non-metallic inclusion types on the crack initiation in high-strength steels in the VHCF regime, 2014, International Journal of Fatigue, 64, S.114-120
  • M. Söker, A.K. Hüsecken, B. Dönges, A. Giertler, U. Pietsch, C.-P. Fritzen, H.-J. Christ, U. Krupp: High and Very High Cycle Fatigue Behavior of an Austenitic-Ferritic Duplex Stainless Steel, Part 1: Experimental Investigation, 6th International Conference on VHCF, 2014, Chengdu, China

Publikationen 2013

  • T. J. Adam, P. Horst: Very high cycle fatigue of fibre-reinforced composites: An alternative experimental approach, Proceedings of the 19th Int. Conference on Composite Materials, Montreal, 2013, pp. 5012–5021
  • D. Backe, F. Balle, D. Eifler: Ultraschallermüdung von CFK im Very High Cycle Fatigue Bereich, Tagungsband, DGM Tagung Werkstoffprüfung 2013, Neu-Ulm, 2013, 163-168
  • T. Beck, S. Kovacs: Influence of high mean stresses on lifetime and damage of the martensitic steel X10CrNiMoV12-2-2 in the VHCF regime, Vortrag & Proceedings, ICF-13, Beijing, 16.-21.06.2013
  • P. Grad, D. Spriestersbach, E. Kerscher: Einfluss der Einschlussart auf das Versagensverhalten hochfester Stähle im VHCF-Bereich, 2013, Fortschritte in der Werkstoffprüfung für Forschung und Praxis, S.103-108
  • E. Bitzek, P. Gumbsch: Mechanisms of dislocation multiplication at crack tips, Acta Materialia 61 (2013) 1394–1403
  • A. Giertler, M. Söker, B. Dönges, K. Istomin, U. Pietsch, C.-P. Fritzen, W. Ludwig, H.-J. Christ, U. Krupp: The significance of two-phase plasticity for the crack initiation process during very high cycle fatigue of duplex steel, 13th International Conference on Fracture, 2013, Beijing, China
  • Gude M, Hufenbach W, Koch I, Koschichow R, Schulte K, Knoll J: Damage Phenomena of Fibre Reinforced Composites under VHCF-loading, The 19th International Conference on Composite Materials (ICCM 19). Montreal, Canada; 2013
  • Gude M, Hufenbach W, Koch I, Koschichow R, Schulte K, Knoll J: Fatigue Testing of Carbon Fibre Reinforced Polymers under VHCF Loading. Materials Science Engineering, Symposium B6 - Hybrid Structures 2013, S. 18–24
  • Helfen T.B., Weickert M., Rabe U., Hirsekorn S., Boller C.: Non-Destructive Testing and Online Monitoring of CFRP Materials at the Very High Cycle Fatigue Regime, International Conference DFC12/SI6 - 12th Deformation and Fracture of Composites and 6th Structural Integrity, Cambridge/UK (2013), 2 Seiten
  • Helfen T.B., Weikert M., Rabe U., Hirsekorn S., Herrmann H.-G., Boller C.: Ultrasonic testing, characterization, and online monitoring of fatigue processes of carbon fibre reinforced plastics, Proc. of JEC Europe, Paris/France (2013) (nur Präsentation)
  • Helfen T.B., Rabe U., Weikert M., Hirsekorn S., Herrmann H.-G., Boller C.: Zerstörungsfreie Charakterisierung und Prüfung faserverstärkter Kunststoffkomposite mit akustischen Verfahren, Symp. Zerstörungsfreie Materialcharakterisierung, BAM Berlin/Germany (2013) (nur Präsentation)
  • P.-M. Hilgendorff, A. Grigorescu, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Simulation of irreversible damage accumulation in the very high cycle fatigue (VHCF) regime using the boundary element method, 2013, Materials Science & Engineering A, 575, 169-176, dx.doi.org/10.1016/j.msea.2013.03.072
  • Hirsekorn S., Helfen T.B., Weickert M., Rabe U., Herrmann H.-G., Boller C.: Online monitoring and characterization of fatigue processes of carbon fiber reinforced plastics by ultrasound, Proc. of 40th Annual Review of Progress in QNDE, Baltimore/MD USA (2013) (nur Präsentation)
  • Hirsekorn S., Helfen T.B., Weickert M., Rabe U., Herrmann H.-G., Boller C.: Ultrasonic monitoring and evaluation of very high cycle fatigue of carbon fiber reinforced plastics, Proc. of NDT in Progress, Dresden/Germany (2013) (nur Präsentation)
  • Knoll JB, Koschichow R, Koch I, Schulte K, Gude M: Bruchmodebezogene Ermüdungsversuche von CFK im VHCF-Bereich, 19. Nationales SAMPE Symposium. Hamburg, Deutschland, 2013
  • Knoll B, Koschichow R, Koch I, Schulte K, Gude M: Failure mode specific fatigue testing of nanoparticle-modified CFRP under VCHF-loading, CompTest 2013 - book of abstracts. Aalborg: Department of Mechanical and Manufacturing Engineering, Aalborg University, 2013
  • A. Kolyshkin, M. Zimmermann, E.Kaufmann, H.-J. Christ: Untersuchung der Rissinitiierung und -ausbreitung mittels des Fernfeldmikroskops im VHCF-Bereich, 2013, In: H.-J. Christ: Werkstoffprüfung 2013: Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Verlag Stahleisen, Düsseldorf, S. 139-144
  • A. Kolyshkin, E. Kaufmann, M. Zimmermann, H.-J. Christ: Development of a fatigue life prediction concept in the very high cycle fatigue range based on microstructural features, 2013, In Proc. Thirteenth International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics (39th National Symposium on Fatigue and Fracture Mechanics), ASTM, ESIS, Jacksonville
  • S. Kovacs, T. Beck, L. Singheiser: Influence of mean stresses on fatigue life and damage of a turbine blade steel in the VHCF-regime, International Journal of Fatigue, Volume 49, April 2013, Pages 90-99, ISSN 0142-1123, dx.doi.org/10.1016/j.ijfatigue.2012.12.012
  • J. J. Möller, A. Prakash, E. Bitzek: FE2AT—finite element informed atomistic simulations, Model. Simul. Mater. Sci. Eng. 21 (2013) 055011
  • Müller, T.; Sander, M.: On the use of ultrasonic fatigue testing technique – Variable amplitude loadings and crack growth monitoring, Ultrasonics, Vol. 53 (8), 2013, pp. 1417- 1424 dx.doi.org/10.1016/ j.ultras.2013.03.005
  • Müller, T.; Sander, M.: Experimental and analytical study of the effect of variable amplitude loadings in VHCF regime, CD-ROM Proc. of International Conference on Fracture 13, Peking, 2013
  • Rabe U., Helfen T.B., Weikert M., Hirsekorn S., Boller C., Backe D., Balle F., Eifler D.: Ermüdung von Kohlenstofffaserverbundwerkstoffen (CFK) durch zyklische Beanspruchung mit hohen Lastwechselzahlen im Ultraschall-Dreipunktbiegesystem, DGZfP-Jahrestagung (2013), DGZfP-Berichtsbände 141-CD (nur Präsentation)
  • T. Straub, T. Kennerknecht, J. Senger, D. Weygand, C. Eberl: Ermüdungsmechanismen von kfz-Materialien in kleinen Volumina im VHCF-Bereich mittels Simulation und neuartiger uni- und multiaxialer Mikro-Ermüdungsversuche, In: Christ, H.-J. (Hrsg.): Fortschritte in der Werkstoffprüfung für Forschung und Technik. 31. Vortrags- und Diskussionstagung Werkstoffprüfung 2013, 28.-29. November 2013, Neu-Ulm, Tagungsband
  • V. Trappe, H.-P. Ortwein, S.Hickmann: Infinite life of CFRP evaluated nondestructively with X-Ray-Refraction Topography, 2013, Vortrag + Paper, ICCM19, 8 Seiten
  • Weikert M., Hirsekorn S., Helfen T.B., Rabe U., Boller C.: Analyse von Ultraschall-Ermüdungssignalen zur Beurteilung der Schädigungsentwicklung in Faserverbundwerkstoffen, DGZfP-Jahrestagung (2013), DGZfP-Berichtsbände 141-CD (nur Präsentation

Publikationen 2012

  • Adam, TJ., Horst, P., Lorsch, P., Sinapius, M: Experimental Investigation of VHCF of Polymer Composites: Two Alternative Approaches, 2012, Materials Testing, Vol. 54, pp. 734-741
  • Backe, D.; Balle, F.; Helfen, T. B.; Rabe, U.; Hirsekorn, S.; Sklarczyk, C.; Eifler, D.; Boller, C.: Ultrasonic fatigue testing system combined with online nondestructive testing for carbon fiber reinforced composites, In: Balle, F. (Ed.): TMS 2012, 141st Annual Meeting and Exhibition. Supplemental Proceedings. Vol.2: Materials Properties, Charaterization and Modeling: Symposium "Ultrasonic Fatigue of Advanced Materials and Systems", John Wiley & Sons, Chichester, (2012), pp. 855-861
  • D. Backe, F. Balle, D. Eifler: Ultrasonic 3-point bending facility for fatigue testing of CFRP in the VHCF range, Proceedings, Committee on Fatigue of Materials (JSMS), Fukuoka (Japan), 2012, 65-70
  • T. Beck, S. Kovacs, L. Singheiser: Early damage detection of a martensitic turbine blade steel during very high cycle fatigue with superimposed mean stresses using nonlinear ultrasonic analysis, Poster, MSE, Darmstadt, 2012
  • P. Grad, B. Reuscher, A. Brodyanski, M. Kopnarski, E. Kerscher: Analysis of the Crack Initiation at Non-Metallic Inclusions in High-Strength Steels, 2012, Practical Metallography, 49, S.468-469
  • P. Grad, E. Kerscher: Fatigue crack paths in the VHCF regime of 100Cr6, 2012, Proceedings of the 4th International Conference on Crack Paths, S.401-408
  • P. Grad, B. Reuscher, A. Brodyanski, M. Kopnarski, E. Kerscher: Mechanism of fatigue crack initiation and propagation in the very high cycle fatigue regime of high-strength steels, 2012, Scripta Materialia, 67, S. 838–841
  • A. Grigorescu, P. Hilgendorff, M. Zimmermann, C. -P. Fritzen, H. -J. Christ: Experimentelle Methoden zur Charakterisierung der VHCF-Schädigungsentwicklung am Beispiel eines metastabilen Austenitstahls, Tagungsband Werkstoffprüfung 2012, Bad Neuenahr, 2012, p. 209-216
  • Gude, M.; Hufenbach, W.; Koch, I.; Koschichow, R.: Fatigue Testing of Carbon Fibre-reinforced Polymers under VHCF Loading, Testing Materials 54, Hanser Verlag (2012) S. 756 – 761
  • Helfen, T. B.; Sridaran Venkat, R.; Rabe, U.; Hirsekorn, S.; Boller, C.: Characterisation of CFRP through enhanced ultrasonic testing methods, Applied composite materials, Vol.19 (2012), No.6, pp.913-919
  • S. Kovacs, T. Beck, L. Singheiser: Influence of high mean stresses on the fatigue behavior of a martensitic turbine blade steel in the VHCF-regime, Vortrag, MSE, Darmstadt, 2012
  • P. Lorsch, M. Sinapius: Experimental investigation of the very high cycle fatigue behaviour of fibre reinforced composites, 2012, Konferenz MSE, Darmstadt
  • Müller, T.; Sander, M.: Numerical investigations of plasticity induced crack closure at block loadings for subsurface crack initiation in the VHCF regime, International Conference on Fatigue Damage of Structural Materials VI, Hyannis, 2012
  • Rabe, U.; Helfen, T. B.; Weikert, M.; Hirsekorn, S.; Herrmann, H.-G.; Boller, C.; Backe, D.; Balle, F.; Eifler, D.: Nonlinear ultrasonic testing of carbon fibre reinforced plastics in the very high cycle fatigue regime, In: Proceedings of Meetings on Acoustics, Int. Conf. on Nonlinear Elasticity in Materials, Vol.16 (2012), Art. 045004, 6 pp.

Publikationen 2011

  • Adam, T.J., Lorsch, Horst, Sinapius: Challenges for the experimental investigation of VHCF of polymer composites, 5th Int. Conference on Very High Cycle Fatigue - VHCF-5, Berlin, 28-30 June 2011
  • Burkart, K.; Bomas, H.; Zoch, H.-W.: Fatigue of case-hardened specimens of two grades of steel SAE 5120 differing in microstructure, 2011, Proceedings of the 5th International Conference on Very High Cycle Fatigue, DVM, Berlin, 159-164
  • P. Grad, B. Reuscher, A. Brodyanski, M. Kopnarski, E. Kerscher: Analyse des Risswachstums ausgehend von nichtmetallischen Einschlüssen, 2011,  Sonderbände der Praktischen Metallographie, 43, S.177-182
  • A. Grigorescu, C. Müller-Bollenhagen, P. Hilgendorff, M. Kübbeler, M. Zimmermann, C.-P. Fritzen, H.-J. Christ: Characterization and Simulation of the Damage Accumulation in the Very High Cycle Fatigue (VHCF) Regime in a Metastable Austenitic Stainless Steel Based on the Resonant Behavior, Proceedings of Materials Science and Technology, Columbus, Ohio, 2011, p. 805-816
  • Gude M, Hufenbach WA, Schulte K, Koch: Adapted test principles for the VHCF-Fatigue analysis of endless fibre reinforced and nano-particle modified polymers, Fifth International Conference on Very High Cycle Fatigue (VHCF5). Berlin, Deutschland; 2011
  • Helfen T.B., Sridaran Venkat R., Rabe U., Hirsekorn S., Boller C.: Characterisation of CFRP through enhanced ultrasonic testing methods, International Conference DFC11/SI5 – 11th Deformation and Fracture of Composites and 6th Structural Integrity, Cambridge/UK (2011), 2 Seiten
  • S. Kovacs, T. Beck: Fatigue Life and Damage Evolution of Martensitic Steels for Low-Pressure Steam Turbine Blades in the VHCF Regime, Poster, VHCF-5, Berlin, 28.-30.06.2011
  • M. Kübbeler, I. Roth, U. Krupp, C.-P. Fritzen, H.-J. Christ: Simulation of stage I-crack growth using a hybrid boundary element technique, 2011, Engineering Fracture Mechanics, 78(3), 462-468, dx.doi.org/10.1016/j.engfracmech.2010.01.004
  • P. Lorsch, M. Sinapius, T. J. Adam, P. Horst: Challenges for the experimental investigation of VHCF of polymer composites, 2011, Konferenz VHCF 5, Berlin
  • H.-P. Ortwein, J. Bohse, V. Trappe: Untersuchung der Mikrorissbildung in Faserkunststoffverbunden mittels Röntgenrefraktions- und Schallemissionsmessung, 2011, Vortrag + Paper, DGZfP Kolloquium, 7 Seiten
  • J. Senger, D. Weygand, O. Kraft, P. Gumbsch: Dislocation microstructure evolution in cyclically twisted microsamples: a discrete dislocation dynamics simulation, Mater. Sci. Eng. 19 (2011) 74004

      Publikationen 2008

      • B. Künkler, O. Düber, P. Köster, U. Krupp, C.-P. Fritzen, H.-J. Christ: Modelling of short crack propagation – Transition from stage I to stage II, 2008, Engineering Fracture Mechanics, 75 (3-4), 715–725, dx.doi.org/10.1016/j.engfracmech.2007.02.018